Removing Staples after Gluing
Staples are used routinely to hold wood components in place until the glue dries. Timm Bogenhagen of the EAA staff shows a couple of techniques to easily remove the staples once the glue is dry.
Wood Wing Rib Jig Construction
Dave Clark shares some tips on making a wood wing rib jig. Dave and other members of Chapter 1311 are helping Paul Poberezny construct a replica of the Mechanix Illustrated Baby Ace.
Bending Wood Capstrips
In this tip, Earl Luce demonstrates an easy method for prebending your wood capstrips. Earl is an EAA SportAir Workshop instructor and a volunteer EAA Technical Counselor.
Achieving a clean cut line without splintering can be a challenge when using a jigsaw. Timm Bogenhagen from the EAA staff gives a couple tips that can minimize wood splintering on your cut line.
Wood Drill Alignment Jig
Timm Bogenhagen from the EAA staff shows how to build and use a simple alignment jig made from a wood block and steel bushing stock. The Jig is useful to align attachment straps when having to use a hand drill.
Erasing Wood Curl
Timm Bogenhagen from EAA staff demonstrates how to use an eraser to remove this fuzz without damaging, removing excess or splintering the wood.
Wood Rib Construction Tips-Part 1
Dave Clark shares some tips on building wood wing ribs. Dave and other members of Chapter 1311 are helping Paul Poberezny construct a replica of the Mechanix Illustrated Baby Ace.