Webinar- Add “Certified SOLIDWORKS Professional” to Your Resume
EAA members may now take the test to become a Certified SOLIDWORKS Professional (CSWP) for free ($99 value). Mike Puckett will introduce this new EAA member benefit and explain how to prepare for the test including topics covered on the test.
Webinar- Ray Aviation Scholarship - A Flight Training Fund for Your Chapter
Through the generous support of the Ray Foundation, EAA will provide up to $10,000 to deserving youths for their flight training expenses, totaling $1,000,000 in scholarships annually. Join David Leiting from the EAA as he explains the details.
Webinar- Charting Your Course- Deciphering the VFR Sectional Chart
CFI Prof. H. Paul Shuch will walk you through the VFR sectional aeronautical charts most frequently encountered symbols, and teach you how to interpret the chart’s sometimes confusing key.
Webinar- Flying to the Bahamas
If flying to a beautiful destination is on your bucket list, this presentation is for you. Bahamas Flying Ambassador Mike Zidziunas answers common questions about the requirements, and discusses the risks and rewards of flying to the Bahamas.
Webinar- Post-Maintenance Checklist
The first flight after maintenance is by far the most likely time for something to go wrong with the aircraft. Mike Busch A&P/IA offers advice on what you should do before and during the first flight after an annual or other major maintenance.
Webinar- Operating Oversquare
Many pilots of constant speed prop airplanes have been cautioned never to operate oversquare, with manifold pressure (in inches) above rpm (divided by 100), to avoid damaging the engine. This is dead wrong according to engine guru Mike Busch.
Webinar- Introduction to Tailwheel Flying Techniques
This presentation will cover the basics of flying a tailwheel aircraft. Glen Oliphant will outline practical techniques as well as identify common errors and discuss wheel and three-point landing techniques.