Webinar- Second Annual GA Engine Summit
Mike Busch participated in the second annual general aviation engine summit, during which aircraft owner groups, engine manufacturers, and other industry representatives met with the FAA to discuss issues involving piston aircraft engines.
Webinar- Amateur-Built Condition Inspections
Vic Syracuse will help educate builders and non-builders on the nuances of performing a condition inspection on an amateur-built airplane. Including many pictures showing where to look for typical wear items.
Webinar- 3-D Scanning and SOLIDWORKS Modeling
Stefan Hokuf from Aeroscan discusses how 3-D scanning is being used in aircraft repair and restoration; including the reverse engineering process from 3-D scan to post-production to model creation in SOLIDWORKS to sourcing fabrication.
Webinar- Weather or Not
Making an informed go/no-go flight decision requires the pilot to collect and evaluate weather information pertinent to the flight. Prof. H. Paul Shuch will help you learn where to turn for help in deciding “weather or not” to fly.
Webinar- Preflight Delight: Look Before you Launch
FAR 91.3 places responsibility for the safety of flight on the shoulders of the pilot in command. That means it is up to the pilot to make sure the aircraft is in a condition for safe operation. Prof. H. Paul Shuch will show you how.
Webinar- Doing GA Single-Pilot IFR Better
Mike Busch discusses the 1981, NASA Aviation Safety Reporting System (ASRS) published report of general aviation single-pilot IFR operations . This webinar takes you on a guided tour of the study's key findings.
Webinar- Secondhand Homebuilt
Existing experimental amateur-built aircraft could be a great option for pilots. Earl Downs discusses the rules, regulations, and downline ownership responsibilities involved in owning and operating a homebuilt aircraft that someone else produced.