TIG Welding Tips
Charlie Becker from the EAA staff provides several tips and tricks to obtain the best possible TIG welds.
Gas Welding Tip Selection
A lot of begining welders ask what size welding tip do I need to weld steel tubing? Dr. Joe Maj, AirVenture volunteer in the Gas welding workshops and SportAir Workshop instructor, answers this confusing question.
Marking Tubing Reference Lines
Timm Bogenhagen from the EAA staff demonstrates an easy way to mark a reference line on long pieces of tubing.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
Fabric Covering Drain Holes
Installing holes in fabric covered airplanes is one of the last steps in the fabric covering process. Timm Bogenhagen from the EAA staff shows an easy way to do this using a round tip soldering iron.
Filler Rods for Gas Welding 4130
Dr. Joe Maj, AirVenture volunteer in the Gas welding workshops and SportAir Workshop instructor shows us the top choices for filler rod for gas welding 4130, and the application for each one.
Cutting Dacron sailcloth
Brian Carpenter from Rainbow Aviation Services shows how to cut dacron sailcloth by modifying a soldering iron into a hot knife.