Marking Tubing Reference Lines
Timm Bogenhagen from the EAA staff demonstrates an easy way to mark a reference line on long pieces of tubing.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
Fabric Covering Drain Holes
Installing holes in fabric covered airplanes is one of the last steps in the fabric covering process. Timm Bogenhagen from the EAA staff shows an easy way to do this using a round tip soldering iron.
Modified Seine Knot - Alternate Method
Jasen Golden from Rainbow Aviation Services demonstrates an alternate sequence to tie the modified seine knot for rib stitching fabric covered aircraft.
TIG Welding Tips
Charlie Becker from the EAA staff provides several tips and tricks to obtain the best possible TIG welds.
Cutting Dacron sailcloth
Brian Carpenter from Rainbow Aviation Services shows how to cut dacron sailcloth by modifying a soldering iron into a hot knife.
Welding Helmets Overview
Not all welding helmets are the same. Charlie Becker from the EAA staff reviews the basic and some special features of helmets and discusses how more than one helmet is useful when welding aircraft structures.