Modified Seine Knot - Alternate Method
Jasen Golden from Rainbow Aviation Services demonstrates an alternate sequence to tie the modified seine knot for rib stitching fabric covered aircraft.
Filler Rods for Gas Welding 4130
Dr. Joe Maj, AirVenture volunteer in the Gas welding workshops and SportAir Workshop instructor shows us the top choices for filler rod for gas welding 4130, and the application for each one.
Gas Welding Tip Selection
A lot of begining welders ask what size welding tip do I need to weld steel tubing? Dr. Joe Maj, AirVenture volunteer in the Gas welding workshops and SportAir Workshop instructor, answers this confusing question.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
Fabric Covering Drain Holes
Installing holes in fabric covered airplanes is one of the last steps in the fabric covering process. Timm Bogenhagen from the EAA staff shows an easy way to do this using a round tip soldering iron.
Joining tubes together requires shaping the tube end to get a good tight fit. Charlie Becker demonstrates a technique he learned from Paul Poberezny to fishmouth tubing for good tight fits.
TIG Welding Accessories Overview
Charlie Becker from the EAA staff provides an overview of several accessories you might want to acquire when setting up your new TIG welding system.