Building Aluminum Rib Jig
Scratch built Super Cub builder and EAA Chapters Manager John Egan shows the wing rib jig he built to assemble his built up aluminum wing ribs.
In Most Recent
Webinar- Where Fuel Meets Air
Spark-ignition reciprocating engines require that fuel be mixed with air in the proper proportion to support efficient combustion, a process known as "fuel metering." Maintenance expert Mike Busch discusses various methods of accomplishing this.
Enter to Win the EAA Sweepstakes Airplane
The Sweepstakes airplane has arrived in Oshkosh after winning the 2018 Antique Grand Champion award at Sun 'n Fun. Hear more from aircraft restorer Don Wade from C&D Aviation and Robin Kasel from EAA on the real impact of the Sweepstakes program.
Webinar- Four Fundamentals of Flight - Breaking it Down to Basics
Avoid information overload by breaking flight down to the four most basic maneuvers. Prof. H. Paul Shuch explains if you can execute these four tasks (first individually and then in combination), you can fly.
Webinar- Technical Counselor Airworthiness Prep
Join Vic Syracuse and Dave Prizio, both designated airworthiness representatives (DARs), for a presentation and discussion regarding prepping first-time builders for their initial airworthiness inspection. They will review common DAR issues found.
EAA technical counselor and A&P/IA Dick Koehler demonstrates the use of heat shrinkable solder sleeves and how they can conveniently be used to tie ground wires together.
Webinar- What Will You Do for an Engine Failure on Takeoff?
Gordon Penner, master CFI-Aerobatics and FAA Gold Seal instructor, discusses decision-making and planning for a possible engine failure on takeoff including the issues associated with the improbable turn back to the runway.