Building Aluminum Rib Jig
Scratch built Super Cub builder and EAA Chapters Manager John Egan shows the wing rib jig he built to assemble his built up aluminum wing ribs.
In Most Recent
Webinar- What Will You Do for an Engine Failure on Takeoff?
Gordon Penner, master CFI-Aerobatics and FAA Gold Seal instructor, discusses decision-making and planning for a possible engine failure on takeoff including the issues associated with the improbable turn back to the runway.
Webinar- Four Fundamentals of Flight - Breaking it Down to Basics
Avoid information overload by breaking flight down to the four most basic maneuvers. Prof. H. Paul Shuch explains if you can execute these four tasks (first individually and then in combination), you can fly.
Midwing Special - It Used to Be a What?
Believe it or not, this airplane used to be a Super Cub. Ben Anderson, EAA 1032615, bought the one-of-a-kind Midwing Special from air show pilot Ned Surratt about three years ago, and spent a couple of years restoring it before bringing it to #OSH17.
Webinar- Where Fuel Meets Air
Spark-ignition reciprocating engines require that fuel be mixed with air in the proper proportion to support efficient combustion, a process known as "fuel metering." Maintenance expert Mike Busch discusses various methods of accomplishing this.
April 2018 Chapter Video Magazine
Topics: flying season, Vistaprint, EAA store purchase card, chapter blasts, insurance request forms, the EAA calendar of events, EAA scholarships, Sport Pilot Academy, ATC privatization and control tower fees, Brodhead Airport, That's All, Brother.
Van's RV Fiberglass Techniques EAA SportAir Workshop
Van’s RVs and similar homebuilt aircraft are largely constructed by working with sheet metal, but there’s more involved, including fiberglass work. EAA’s Van’s RV Fiberglass Techniques SportAir Workshop class is the perfect solution.