Webinar- Breaking Good
Mike Busch, A&P mechanic with inspection authorization discusses how to break in new engine cylinders. Just one, two, or after a top or major overhaul. Mike cuts thru conflicting information, and reviews the principles of how to do it right.
In Maintenance and Inspection
Webinar- An IA's Dilemma
When performing an annual inspection, what should an IA do when they find something in the aircraft's maintenance records that conflicts with what the aircraft owner says? Maintenance expert and A&P/IA Mike Busch explores this issue.
Webinar- Inside the Crankcase
The crankcase of your aircraft engine contains the crankshaft, camshaft, connecting rods, bearings, gears, and other components that are collectively known as the "bottom end". Mike Busch takes you for a guided picture tour of these components.
Webinar- Operating Oversquare
Many pilots of constant speed prop airplanes have been cautioned never to operate oversquare, with manifold pressure (in inches) above rpm (divided by 100), to avoid damaging the engine. This is dead wrong according to engine guru Mike Busch.
Webinar- Tail Wheels 101: Inspection and Maintenance
Improperly maintained tail wheels can cause ground handling and potential loss of control issues. EAA Flight Training Manager and A&P/IA mechanic Joe Norris discusses commonly overlooked items and tips to inspect and maintain a tail wheel assembly.
Webinar- Turbocharging Systems
The job of a turbocharging system is to fool the engine into thinking it's at sea level even when you're flying at flight level 180. Mike Busch explains how turbo-systems work and explores their pros and cons.
Webinar- What's Changed, What Hasn't
Mike Busch, A&P mechanic with inspection authorization, looks back over the more than 50 years that he's owned piston GA airplanes and explores what has changed in piston powerplant technology over that time and what hasn't changed.