Crimping Butt Connectors
EAA technical counselor and A&P/IA Dick Koehler discusses how to use butt connectors and demonstrates wire splicing using a butt connector.
In Hints for Homebuilders
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Spark Plug Heat Transfer Paste
Brian Carpenter from Rainbow Aviation demonstrates how to apply heat transfer paste to spark plugs used in a Rotax 912 series engine.
Easy Fuselage Layout
Pietenpol and Super Cub builder John Egan demonstrates a technique to layout and draw in full scale the sides of a fuselage. Once laid out the members can be built in place on top of the layout lines.
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.
Bending Steel Tubing
Bending steel tubing is required on many steel tube fuselage designs. Scratchbuilt Super Cub builder and EAA chapter manager John Egan shows a jig he built and demonstrates how to bend tubing using the jig.
Basics of Stripping and Crimping Wire
Dick Koehler demonstrates basic techniques of stripping and crimping wire. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.