Fabricate Aluminum Rib Intercostal
Built up wing ribs have several component parts. In this video EAA chapter manager John Egan demonstrates how he fabricated an intercostal for his scratch built Super Cub aluminum ribs.
In Hints for Homebuilders
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Easy Fuselage Layout
Pietenpol and Super Cub builder John Egan demonstrates a technique to layout and draw in full scale the sides of a fuselage. Once laid out the members can be built in place on top of the layout lines.
Basics of Stripping and Crimping Wire
Dick Koehler demonstrates basic techniques of stripping and crimping wire. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.
Removing a Hat Button
That button on the top of a hat can hurt if wearing a headset while flying. Dick Koehler shows us how to easily remove this headache button.
Bending Steel Tubing
Bending steel tubing is required on many steel tube fuselage designs. Scratchbuilt Super Cub builder and EAA chapter manager John Egan shows a jig he built and demonstrates how to bend tubing using the jig.
Crimping Butt Connectors
EAA technical counselor and A&P/IA Dick Koehler discusses how to use butt connectors and demonstrates wire splicing using a butt connector.