Document Project with Smartphone
Mark Forss from the EAA staff discusses and shows the wide variety of accessories you can get for a smartphone to use for documenting your aircraft building project.
In Hints for Homebuilders
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.
Fabricate Aluminum Rib Intercostal
Built up wing ribs have several component parts. In this video EAA chapter manager John Egan demonstrates how he fabricated an intercostal for his scratch built Super Cub aluminum ribs.
EAA technical counselor and A&P/IA Dick Koehler demonstrates the use of heat shrinkable solder sleeves and how they can conveniently be used to tie ground wires together.
Bending Steel Tubing
Bending steel tubing is required on many steel tube fuselage designs. Scratchbuilt Super Cub builder and EAA chapter manager John Egan shows a jig he built and demonstrates how to bend tubing using the jig.
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Spark Plug Heat Transfer Paste
Brian Carpenter from Rainbow Aviation demonstrates how to apply heat transfer paste to spark plugs used in a Rotax 912 series engine.