Brian Carpenter from Rainbow Aviation demonstrates the use of bonding brushes to prepare a surface for a grounding lug to be properly attached to the airframe.
In Hints for Homebuilders
Easy Fuselage Layout
Pietenpol and Super Cub builder John Egan demonstrates a technique to layout and draw in full scale the sides of a fuselage. Once laid out the members can be built in place on top of the layout lines.
Building Aluminum Rib Jig
Scratch built Super Cub builder and EAA Chapters Manager John Egan shows the wing rib jig he built to assemble his built up aluminum wing ribs.
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.
Bending Steel Tubing
Bending steel tubing is required on many steel tube fuselage designs. Scratchbuilt Super Cub builder and EAA chapter manager John Egan shows a jig he built and demonstrates how to bend tubing using the jig.
Fabricate Control Surface Hinges
EAA chapter manager John Egan shows how he built hinges used for the elevator and rudder of his scratch built Super Cub project.