Document Project with Smartphone
Mark Forss from the EAA staff discusses and shows the wide variety of accessories you can get for a smartphone to use for documenting your aircraft building project.
In Hints for Homebuilders
Spark Plug Heat Transfer Paste
Brian Carpenter from Rainbow Aviation demonstrates how to apply heat transfer paste to spark plugs used in a Rotax 912 series engine.
Easy Fuselage Layout
Pietenpol and Super Cub builder John Egan demonstrates a technique to layout and draw in full scale the sides of a fuselage. Once laid out the members can be built in place on top of the layout lines.
Fabricate Aluminum Rib Intercostal
Built up wing ribs have several component parts. In this video EAA chapter manager John Egan demonstrates how he fabricated an intercostal for his scratch built Super Cub aluminum ribs.
Forming Steel with Arbor Press
Forming steel plate can be made easy using an arbor press and homebuilt fabricated dies. EAA Chapters Manager John Egan reviews his fabricated components then demonstrates how to form a wood floor hold down clamp.
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.