Installing Circuit Breakers
Dick Koehler show how to install circuit breakers for your panel. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.
Basics of Stripping and Crimping Wire
Dick Koehler demonstrates basic techniques of stripping and crimping wire. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.
Key Switch Installation
Tracy Buttles from the EAA staff demonstrates how to install a ignition key switch into an instrument panel in a way that locks it in place and prevents it from rotating within the mounting hole.
Crimping Butt Connectors
EAA technical counselor and A&P/IA Dick Koehler discusses how to use butt connectors and demonstrates wire splicing using a butt connector.
Solenoids: Master Relay and Starter Relay
Most aircaft are going to have a master relay and a starter relay. Dick Koehler discusses operation and installation of the relays. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.
Electrical Volt-Ohm Multimeter
Dick Koehler discusses the use of a digital volt/ohm multimeter which is a useful tool for diagnosing electrical issues.
Soldering Tips-Holding Wires
Holding 2 wires together for soldering can be a challenge, especially if they are under your instrument panel. Mitch Zehr from the EAA aircraft maintenance staff shows how to use the plastic top from a spray can to help make it easier.