Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Pulling Blind Rivets in Hard to Reach Places
Trying to get a blind rivet into cramped quarters can be challenging. In this week's video, Jon Gougar shares a handy tip to accomplish this task easily. Jon is a Sonex builder from EAA Chapter 383.
Volunteers Hard at Work
Look who we found volunteering for AirVenture 2011. Over 5,000 volunteers come each year to help get the site ready for the big show. If you want to volunteer during your visit, stop by the volunteer booth to find a job. You'll have a blast!
Webinar - International Learn to Fly Day
International Learn to Fly Day Have you always dreamed of becoming a pilot? It’s not as hard as you might think, with Ron Wagner.
F22 Slow Vert
SBotsford from Albuquerque: Raptor slow fly by with near vertical climb and level off followed with a right turn the hard way.
Installing a Nut in a Hard to Reach Place
Getting a nut onto a bolt can sometimes be a big challenge. In this segment, Jack Dueck shows how he has solved the problem. Jack is a Technical Counselor, Sportair Workshop Instructor and member of both the EAA Homebuilt Aircraft Council and Canad
Installing a Nut in Hard to Reach Places
When you assembling your aircraft, you will run into place where it seems virtually impossible to be able to a nut onto a bolt. Mark Forss, anEAA staff member and SportAir Workshop instructor, shows a few techniques that might solve this problem.