Hints for Homebuilders532 videos
Removing a Hat Button
That button on the top of a hat can hurt if wearing a headset while flying. Dick Koehler shows us how to easily remove this headache button.
EAA technical counselor and A&P/IA Dick Koehler demonstrates the use of heat shrinkable solder sleeves and how they can conveniently be used to tie ground wires together.
Crimping Butt Connectors
EAA technical counselor and A&P/IA Dick Koehler discusses how to use butt connectors and demonstrates wire splicing using a butt connector.
Basics of Stripping and Crimping Wire
Dick Koehler demonstrates basic techniques of stripping and crimping wire. Dick is a technical counselor for EAA Chapter 186, an A&P mechanic with IA, and a SportAir Workshop instructor.
Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
Building Aluminum Rib Jig
Scratch built Super Cub builder and EAA Chapters Manager John Egan shows the wing rib jig he built to assemble his built up aluminum wing ribs.
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.
Bending Steel Tubing
Bending steel tubing is required on many steel tube fuselage designs. Scratchbuilt Super Cub builder and EAA chapter manager John Egan shows a jig he built and demonstrates how to bend tubing using the jig.
Easy Fuselage Layout
Pietenpol and Super Cub builder John Egan demonstrates a technique to layout and draw in full scale the sides of a fuselage. Once laid out the members can be built in place on top of the layout lines.
Fabricate Control Surface Hinges
EAA chapter manager John Egan shows how he built hinges used for the elevator and rudder of his scratch built Super Cub project.
Fabricate Aluminum Rib Intercostal
Built up wing ribs have several component parts. In this video EAA chapter manager John Egan demonstrates how he fabricated an intercostal for his scratch built Super Cub aluminum ribs.
Forming Steel with Arbor Press
Forming steel plate can be made easy using an arbor press and homebuilt fabricated dies. EAA Chapters Manager John Egan reviews his fabricated components then demonstrates how to form a wood floor hold down clamp.
- Load More